Size: 1m x 1m x 20mm thick
Key Benefits
Produced from 98 % recycled rubber Easy to cut Resilient to moisture Dramatically reduces point load vibration20mm thick
A black recycled resilient rubber panel designed to absorb and reduce point load vibration for use under washing machines and treadmills.
This product is ideal for reducing vibration caused from products such a washing machines, compressors or exercise equipment.
It does not reduce the airborne noise that these items might create but helps to de – couple the vibration. The vibration is what will pass through the floor joists to the neighbours below.
The panels are 1 metre square and can be easily cut with a saw or jigsaw.
If further reduction is needed we would advise doubling up the panels to create a 40 mm layer.
We advise you add a layer of hard board under the pad as the feet of the product sitting on it may dig into the rubber over time. This can be sourced from any DIY store that sell wood.
The Anti - Vibration Pad is also often used under:
-
Bass speakers
-
Tumble Dryers
-
Home cinema sub woofers
-
Treadmills
-
Rowing machines
-
Mini Trampolines
It is important that the thin panel used to support the feet of the appliance does not come into contact with the walls of the enclosure where the appliance is fitted to reduce the possibility of structure borne vibration being transmitted through adjacent cupboards and walls.
PLEASE NOTE: WE ONLY PROVIDE THE BLACK RUBBER ANTI - VIBRATION PAD AND NOT ANY WOOD BOARDING THAT WILL SIT ON TOP.
Anti - Vibration Pad
Speaker Isolators
SoundBlocker Membrane
Acoustic Sealant
Acoustaseal Tape
SAFRFFB6 - FRFFB6
Acousticel R10
Acoustic Hoods
Music Isomat
Wire Netting