Enclosure Kits

Our Acoustic Enclosure Kits are ideal for controlling noise by reducing the reflection of sound from boundary surfaces thus reducing the overall noise levels. Using a kit will greatly help you comply with the Control of Noise at Work Regulations.

The kits below are designed to be installed within a secure enclosure. We would advise making this enclosure with MDF or a solid mass object. The kits are easy to install and come with detailed fitting instructions. The main Acoustic foam, SA25FF/B/6 adheres to the inside of the enclosure and the pump or noise source sits on the Vibration Pad.

The full install instructions can also be seen above. More information on soundproofing enclosures can be seen here

Our Small Pump Kit contains:

1 x sheet of SA25FF/B/6  (1200 x 900 x 32mm thick per sheet)

1 x can of Sta-Put Adhesive

1 x Set of fitting Instructions (Suitable for small domestic pumps)  

Our Large Pump Kit contains:  

4 x sheets of SA25FF/B/6  (1200 x 900 x 32mm thick per sheet)

2 x cans of Sta-Put Adhesive

1 x Set of fitting Instructions (Suitable for larger commercial pumps or other noisy equipment)  

IF YOU REQUIRE EXTRA MATERIALS THESE CAN BE PURCHASED INDIVIDUALLY FROM US.