Our Lite Laminate System is designed specifically to reduce the impact (walking/footfall) & airborne noise creating when walking on a laminate, engineered wood and solid timber floors.
When you walk on these surfaces a large amount of impact as well as airborne noise is created (due to the hard surface) this can often be a nuisance to the people living below.
The system is made up of two parts,
Our
Acoustic Laminate Underlay a 4.2mm layer of high density resilient rubber sponge with a foil faced moisture & thermal barrier laminated to one side. This can be easily cut with a knife or scissors. Click
HERE to see just how much better this product is than standard Laminate Underlay and under this two layers of our
Soundproofing Mats which perform better than lead at reducing airborne noise like talking and music.
The system is supplied with the following products included;
A layer of Acoustic Laminate Underlay - (11m x 1.37m x 4.2mm thick.) per roll
2 x Layer of Soundproofing Mats - (1.8m x 1.2m / 6ft x 4ft) per mat
Special Spray Adhesive (15oz 426 gram cans)
The system is easy to fit with little D.I.Y experience and is simply laid directly on the floor. There is no need for a laminate underlay when using this system.
Once ordered the products are all delivered to your door (Access Permitting) with full step by step install instructions.
Please note: This system is effective at reducing normal noise levels, that should not normally be heard, for example talking, radio and TV sound. Loud music and bass noise will always be audible although its intensity will be reduced.
"I purchased your Lite Laminate System. It has noticeably reduced the noise of footfall on the laminate and I have not heard any complaints from my downstairs neighbours. It also seems to have insulated the floor from cold a bit better than the previous (cheap) underlay." Andreas Baas